The VCU College of Engineering, an innovation front-runner in academics and research, brings real-world education to Central Virginia. Our collaborative and multidisciplinary partnerships prepare undergraduate, master’s and doctoral students for leadership. Part of a premier research university, the VCU College of Engineering enhances regional and global prosperity through cutting-edge developments in tissue engineering, drug delivery, bioinformatics, cybersecurity, mechanical systems and particle science. We make it real by turning great ideas into breakthrough technologies. Our facilities are hubs of discovery, powered by an expanding student body and faculty committed to excellence.

VCU College of Engineering

New Row

Contact expert @[Full Name](fullname), @[Job Title](job_title) at @[Organization](organization) for media, speaking, professional opportunities and more.

@[Full Name](fullname) at @[Organization](organization) | Contact Form

Expert Inquiry

Open Sans

IEEE : Senior Member

AI Augmentation for Trustworthy AI: Augmented Robot Teleoperation

Work in Progress: Sustainable Collaborations Between Math and Engineering

https://doi.org/10.25891/1z36-ks38

One-step 3D-printing process for microwave patch antenna via conductive and dielectric filaments

Signal Processing of Electroencephalogram for the Detection of Attentiveness towards Short Training Videos

The S-band transmitter design for the Institute of Accelerating Systems and Applications racetrack microtron

Mode Matching Analysis of the Coplanar Microstripline on a Layered Dielectric Substrate

Multiple Fundamental Frequency Pitch Detection for Real Time MIDI Applications(Link)

Professor Filippas earned her Diploma in Electrical Engineering from the University of Patras in Greece and her M.S. and Ph.D. degrees from the University of Texas at Austin (1993). After working as a post-doctoral researcher at the Institute of Accelerating Systems and Applications, Professor Filippas worked in the microwave and rf simulation and design software industry for a number of years; in 2004, she joined the VCU College of Engineerin, Department of Electrical and Computer Engineering. In 2008, she was named Associate Chair of the Electrical and Computer Engineering Department and in 2010 as the Associate Dean for Undergraduate Studies for the VCU College of Engineering. During this time, Professor Filippas developed and fostered unique undergraduate experiences, such as the da Vinci program and VIP (Vertically Integrated Projects). She also served as mentor to a number of student organizations, and continues to serve as the faculty advisor to the VCU Society of Women Engineers (SWE) and HKN. In 2019, Professor Filippas also took on the role of joint chapter chair of the IEEE Education Society, Richmond and Northern Virginia Chapters.  Professor Filippas is currently (since 2019) the VCU College of Engineering's representative to the Commonwealth Center for Advanced Manufacturing (CCAM - https://ccam-va.com/). Her research focuses on Smart Manufacturing, Data Analytics, and Modeling. Dr. Filippas is also very highly engaged in teaching and educational research. Current projects include the NSF-funded SUMMIT-P: A National Consortium for Synergistic Undergraduate Mathematics via Multi-institutional Interdisciplinary Teaching Partnerships (https://www.summit-p.com/). This is a consortium of eleven institutions collaborating to revise and improve the curriculum for lower division undergraduate mathematics courses. Dr. Filippas’ research background in Microwave and RF component analysis and design has informed her innovative approach to teaching electromagnetics; emphasis is placed on simulating real-world situations and developing images and animations that help students immerse themselves in the study of this fascinating topic.

Electromagnetic Device Modeling

Data Analytics

Higher Order Statistical Analysis

Multimodal Data Analytics

Experimental Design

Smart Manufacturing

Greek

English

CCAM Welcomes Data Analytics Fellow

VCU and VUU to offer dual degrees in physics and engineering or chemistry and engineering this fall

More women are seeking STEM-related degrees at VCU, university says

Collaborative Research: A National Consortium for Synergistic Undergraduate Mathematics via Multi-Institutional Interdisciplinary Teaching Partnerships (SUMMIT-P)

researchers-seek-to-find-new-ways-of-building-permanent-magnets-reducing-dependency-on-rareearth-elements

Radhika Barua, Ph.D. and fellow VCU professors Afroditi Filippas, Ph.D., and Everett Carpenter, Ph.D., are part of a team of VCU researchers working to create new types of magnets.

Professor

Assistant Professor, Department of Mechanical and Nuclear Engineering

Permanent magnets play an indispensable role in renewable energy technologies, including wind turbines, hydroelectric power generators and electric vehicles.

Ironically, the magnets used in these “clean energy” technologies are made from rare earth elements such as neodymium, dysprosium and samarium that entail environmentally hazardous mining practices and energy-intensive manufacturing processes, according to Radhika Barua, Ph.D., mechanical and nuclear engineering assistant professor. Access to these rare earth magnets is also heavily reliant on China and demand for them is expected to grow as the U.S. seeks to meet net-zero carbon emissions by 2050.

“That anticipated demand poses a challenge to U.S. decarbonization goals as the rare earth elements are characterized by substantial market volatility and geopolitical sensitivity,” Barua says. “This is where our project comes in.”

Barua and fellow VCU professors Afroditi Filippas, Ph.D., and Everett Carpenter, Ph.D., are part of a team of VCU researchers working to create new types of magnets. By using additive manufacturing, more commonly known as 3D printing, they hope to create replacements for those permanent magnets composed of rare earth elements that are made from materials readily available in the U.S.

China mines 58 percent of the global supply of rare earth elements used to make neodymium magnets that are widely used in consumer and industrial electronics, the U.S. Department of Energy (DOE) noted in a February 2022 report. That dominance grows throughout the manufacturing process with China accounting for 92 percent of global magnet production, the DOE estimates.

“It would be ideal if we could manufacture the same magnets with the same characteristics without using rare earth elements,” says Filippas, who teaches electromagnetics at VCU. “It would be even better if we could make these magnets using additive manufacturing techniques.”

VCU researchers are trying to do that in collaboration with the Commonwealth Center for Advanced Manufacturing (CCAM), which brings university, industry and government officials together to tackle manufacturing challenges. The professors are conducting much of their work at CCAM’s lab in Disputanta, Virginia.

“We have access to equipment that we would not have access to at VCU,” Filippas says of the benefits of the CCAM partnership. “They provide that level of expertise using the equipment and understanding the process.”

The project is funded by the VCU Breakthroughs Fund and CCAM.

Barua is working with Carpenter, a chemistry professor, on the materials science part of the project. Filippas is focusing on data analytics and is helping develop a monitoring process to ensure the newly-crafted replacement magnets are viable.

In addition to providing a more stable source of supply, Barua says the replacement magnets could also bring environmental benefits. Providing an alternative to rare earth magnets would involve less hazardous mining techniques while also reducing emissions and energy consumption.

The replacement magnets are made by filtering particles of iron, cobalt, nickel and manganese through a nozzle where a laser fuses them together through a process known as direct energy deposition. That metal 3D printing approach can make complex shapes while minimizing raw material use and manufacturing costs, Barua says.

“Right now, we’re printing straight lines just to see what we’re going to get and see if we can even print them,” Filippas says. “Are we getting the composition of the materials that we want? It’s a slow painstaking process towards freedom from reliance on rare earth materials.”

Barua says using additive manufacturing allows researchers to create a unique microstructure layer-by-layer instead of simply making magnets from a cast. Researchers do not expect their replacements to mimic the full strength of rare earth magnets, but they hope to produce mid-tier magnets that are as close as possible to current magnets.

Carpenter adds their new magnets could potentially be smaller and weigh less than rare earth magnets, which could lead to numerous benefits.

“This reduction would be a big savings to the automobile manufacturing industry, for example, where every ounce matters,” Carpenter says. “In an S-Class Mercedes, there are over 130 magnets used in sensors, actuators or motors.  This approach could save pounds of weight which translates into fuel efficiency.”

Barua says the team is working to establish the feasibility of their new magnet-making process. They are trying to get the microstructure of the new magnets just right and are using additive manufacturing to fine-tune their magnetic properties, Barua says.

“When artificial diamonds, cubic zirconia, was synthetically produced in the lab, it changed the entire diamond industry,” Barua says. “That’s exactly what we’re trying to do. We’re trying to make synthetic magnets.”


Researchers seek to find new ways of building permanent magnets, reducing dependency on rare-earth elements

EGRE 101 - Electric Motor Video

Created for a pre-lab assignment for EGRE 101. Created by Adam Neel.

EGRE Lab Project DC Motor

Select Inquiry Type